Acrylic coatings Casali (Italy) consist of two or more layers of poured in place of the acrylic. The coatings have been successfully operated the same way as in closed halls and outdoor areas.
Plasticizers exclude the possibility of cracking of the coating layers in case of sudden changes in temperature.
Cushioning layer (if necessary) and poured in place and consists of a mixture of rubber granules and a binder. Due to the accurate selection of the chemical composition of the layers is achieved by a monolithic solid surface, comfortable and safe for the players.
Liquid acrylic coatings Casali used as tennis surfaces such as "hard" and relaxed "hard."
Produced in five standard colors: red, green, dark green, blue, light blue. At customer's color scheme may be varied. Advantages over other acrylic coatings is elasticity, resistance to abrasion, high adhesion and the ability to override the base of small cracks.
Supersoft – Supersoft W.S
Supersoft System is a traditional synthetic surface, which provides ideal ball bounce and convenient movement of the legs. So courts of maintenance is required, they are resistant to weathering and abrasion.
Certification ITF - Category 2;
Requirements for fire resistance (Italy) - class 1;
Certification STA - Class 2;
Technical information:
Sports asphalt surface is placed on a base thickness of about 1-1.5 mm. First applied 1-2 coats Softbase (soft base), a synthetic coating that fills the pores of asphalt base and then successively applied 3-4 coats of mastic Supersoft desired color (Coverage about 2.5 kg / sq.m.). This is a copolymer of styrene-acrylic compound elastomeric, which, after pre-compaction of asphalt coating provides a tennis court game speed, close to the speed of the game on the courts with clay surface. This type of court with a very long service life, it requires no maintenance, resistant to ultraviolet rays and bad weather conditions.
Layout lines for the court is done with Pitlinea: Product based on styrene-acrylic resin with a strong covering pigmentation.
Through an intermediary layer of granulated rubber, Supersoft Doppio system makes the floor highly elastic, providing comfort to the player and the perfect ball bounce. This floor does not require maintenance, it is resistant to weather and mechanical damage.Certification ITF - Category 2.
Technical information:
Laying a sports coat thickness of 1.5-2 mm in several steps:
1) applied to the asphalt base 1-2 layers of synthetic coatings Softbase, flow rate of approximately 1 kg / sq m;
2) apply 3-5 layers of mastic Supersoft Doppio, flow rate of approximately 1.5 kg / sq. Game quality of the coating increases proportionally to the number of layers deposited;
3) apply 1-2 coats of the final layer of Top Doppio, which consists of a copolymer of styrene-acrylic compound elastomeric and mineral filler. Coverage is approximately 0.500 - 1 kg / sq.
This coating is very durable, maintenance-free and has high resistance to abrasion, UV rays and bad weather conditions. Layout lines for the court is done with Pitlinea: Product based on styrene-acrylic resin with a strong covering pigmentation.
The absolute innovation: the cushion of crumb rubber does not contain quartz inclusions, and is protected by highly elastic synthetic resin, which, in turn, is not subject to abrasion and impact of weather conditions. System Surface Evolution also easy to install, as well as other systems, but its flexibility makes it even more secure coverage, reduces pressure on joints and provides exceptional gaming performance.
Certification ITF - Category 1;
Requirements for fire resistance (Italy) - class 1;
Technical information:
Laying a sports coat thickness of approximately 3 mm in several steps:
1) applied to the asphalt base 1-2 layers of synthetic coatings Softbase, flow rate of approximately 1 kg / sq m;
2) using the squeegee apply 3-4 coats of synthetic elastomeric (containing no inert material), and single-component water-based primer flexible Surface Evolution, Coverage about 2 kg / sq.
3) using the squeegee apply 2-3 coats of the final cover Comfort Coating, consisting of a styrene-acrylic elastomer and mineral filler. In color may vary. Coverage of 1-1.5 kg / sq.
This coating is not only very durable, but also resistant to abrasion and UV rays. Requires no maintenance.
Premium
System Premium is a traditional coating for courts, which is based on polyurethane resin, with the final layer with granules EPDM. System modified for installation on asphalt or cement foundation.
This soft floor system, is ideal for sports, as well as for traditional amateur games.
Technical information:
1) using the squeegee or trowel applied to the asphalt base layer 5 mm Pori stop, two-component polyurethane product consisting of a polo and isocyanine tropic adduct, which fills the pores in the asphalt base. Application rate averaged about 1 kg / sq. But consumption also depends on the porosity of the base.
2) after application of the product cured - at least by 12-20 hours after application of the substance filling the pores - apply a coat of Premium with a 3-mm notched trowel. Consumption of substances is about 4 kg / sq.
3) after hardening of the product, after 12-20 hours after the first coat, using a notched trowel-mm apply a second layer of Premium and immediately spread over the surface of a large number of granules EPDM. Once the material hardens, remove the excess beads. Premium expense of about 1.3 kg / sq.
Layout lines for the court is done with Pitlinea: Product based on styrene-acrylic resin with a strong covering pigmentation.
System Poly sport - ideal for sports grounds used for various sports. This coating is not only elastic, but also highly resistant to abrasion and weathering.
Requires no maintenance.
Technical information:
Put on an asphalt base 1-2 layers of thick foundation Soft base 1-1.5 mm, which fills the pores in the asphalt. Then apply 3-4 coats of special mastic Poly sport desired color. The total consumption of about 2.5 kg / sq. This copolymer of styrene-acrylic compound elastomeric, after ramming the playing surface makes it versatile and suitable for different sports. This type of court is very durable, maintenance-free, highly resistant to ultraviolet rays and bad weather conditions.
Layout lines for the court is done with Pitlinea: Product based on styrene-acrylic resin with a strong covering pigmentation.
This system provides flexibility and endurance sports coverage, and is ideal for use in sports facilities. The combination of crumb rubber mat and a topcoat of polyurethane-based resin is the best choice in terms of quality and versatility of this system.
Technical information:
1) Thoroughly clean the surface;
2) Use the notched trowel paste made 4-13 mm from grainy rubber mat to the bottom Spormat with glue Pavisint Glue 80 (two-component polyurethane adhesive). Glue consumption is approximately 0.7-0.9 kg / sq. Squeeze the rubber mats to freshly applied layer of glue and the glue to dry to give;
3) Using a spatula apply a layer of smooth Pavisint Sealer 45 (two-component polyurethane product) that fills the pores in the rubber mat. First apply along the junction of the mat, then the entire surface of the mats. Consumption Pavisint Sealer 45 is about 0.5 kg / m, but also depends on the surface area change;
4) Once the product has hardened, after 12-20 hours after the last coat, apply Pavisint SL 75 (polyurethane coating for gyms) and flatten it with a metal spatula. Consumption is about 0.300 kg / sq.
5) Once the product has hardened, ie after 12-20 hours after the last coat, notched trowel with a second layer applied Pavisint SL 75, self-leveling polyurethane. Consumption is 2.4 kg / sq.
6) Once the product has hardened, after 12-20 hours after the previous layer, with a roller or brush applied Pavisint Finish 90 (colored elastic two-component coating). Consumption is 0.200 kg / sq.
Layout lines for the court is done with Pitlinea: Product based on styrene-acrylic resin with a strong covering pigmentation.
Colorsint
System Colorsint, of course, the ideal solution for coloring and protecting asphalt bicycle paths, parking lots, bus lanes and traffic lanes for taxis. Colorsint not only resistant to abrasion and weather conditions, but also for fuel and lubricants.
Certified A.N.A.S.;
Certification ITF - Category 1.
Technical information:
Put on an asphalt base (new or old, but in good condition) 3-4 layers Colorsint (styrene acrylic emulsion enhanced by special additives, pigments and inert substances) layer of about 1-1.5 mm. Consumption is about 2-2.5 kg / sq. This is a styrene-acrylic copolymer compound that after compaction will turn into an excellent coating for asphalt bike paths, parks, sidewalks and traffic lanes for buses and taxis. Cover not only the wear-resistant, but also non-slip (as in dry and wet), has a lasting color, is not affected by the action of UV light and fuel. Requires no maintenance.
Layout lines for the court is done with Pitlinea: Product based on styrene-acrylic resin with a strong covering pigmentation.
The system is designed to Colortop asphalt, resistant to abrasion, impact of fuel and kerosene.
Successfully used at airports, petrol stations, car parks, pedestrian and bicycle paths.
Certified A.N.A.S.
Technical information:
Apply 2-3 coats Colortop (styrene acrylic emulsion enhanced by special additives, pigments and inert substances) on the asphalt base (new or old, but in good condition). Flow rate of 1-2.5 kg / m, the number depends on the application method and porosity of the base. After thorough compaction coverage Colortop be durable and non-slip even when wet. Ideal for bike paths, parks, sidewalks, traffic separation lanes. The color coating is stable and resistant to ultraviolet rays and fuel, requires no maintenance. Has the antireflective effect.
Polysport-HP-30
Polysport HP system 30 is designed specifically for ice rinks on an asphalt base and guarantee the excellent quality of skating. Thanks to a special coating on the system is smooth and non-slip.
Technical information:
Laying the surface thickness of 1.5 mm occurs in several stages:
1) Apply 2 coats of Polysport HP 30 Base with a smooth squeegee. Polysport HP Base 30 is a colored coating-base, which fills the pores in the asphalt base. Consumption is about 1.5 kg / sq.
2) After the coating has hardened, apply 2 coats of a special postmark Polysport HP 30 desired color using smooth squeegee. Coverage: 1 kg / sq.
3) Once the coating has hardened, apply 2 coats of the final layer Polysport HP 30 Finish the desired color using smooth squeegee. Consumption: 0.600 kg / sq.
Layout lines for the court is done with Pitlinea: Product based on styrene-acrylic resin with a strong covering pigmentation.
Ribosint
Ribosint system based on polyurethane resin-coated rubber crumb EPDM. This system is designed for sites in the open air or indoors, on asphalt or cement platform. When you purchase this system, the customer may be granted a certificate extinguishing (class 1. Ribosint P)
Technical information:
Laying bowling thickness of 4 mm on the concrete basis is carried out in several stages:
1) Apply a coating Epobase S (two-component epoxy primer with a high level of impregnation) in order to better fit with subsequent layers.
2) Once the product has hardened, ie after 20-36 hours after the last coat, smooth platform, apply with a smooth spatula Ribosint (two-component polyurethane mix). Consumption: 0.5-1 kg / sq. m, depending on the characteristics of the platform.
3) Once the product has hardened, ie after 12-20 hours after the first coat, apply Ribosint (two-component polyurethane self-leveling product) with a 2-mm notched trowel. Consumption approximately: 2.6 kg / sq.
4) Once the product has hardened, after 12-20 hours after the first coat, apply a second layer Ribosint, with a 1-mm notched trowel. Flow rate: 1.3 kg / sq. After application, the surface immediately to handle a large number of granules EPDM.
5) After the product has cured - after about 20 hours, remove excess granules from the surface and fill with quartz sand.